Moonstone resin for DLP/LCD
3-D printer resin contains more wax, specially used for flat and smooth surfaces for direct jewelry casting
Price on Request
Specifications
| color | Transparent yellow |
| Viscosity | 250~350 CPS |
| Density | 450~55 0cps(25°C) |
| identity | direct castable resin for jewelery |
Product Details
Washing Phase
Drain resin: Let excess liquid resin drip off the model back into the vat.
Initial rinse: Wash off loose liquid resin using clean 95% alcohol (do not reuse this alcohol for soaking).
Alcohol soak:
Standard models: Soak in clean 95% alcohol for 30 minutes.
Block models: Soak for 15 minutes, flip over, and soak for 15 minutes more.
Ultrasonic wash: Clean in fresh 95% alcohol using an ultrasonic cleaner for 5 minutes.
Curing Phase
Hot water rinse (90°C–100°C): Dip into hot water repeatedly until the water stays completely clear.
Bubble removal: Place in hot water inside an ultrasonic cleaner for 30 seconds to clear surface air bubbles.
Block models: Soak in hot water for 10 minutes before moving to UV curing.
UV Light Curing:
Cure under a 30W UV light for 40 minutes total.
Flip the model at the 20-minute mark for an even cure.
Reduce time accordingly if using a higher wattage lamp.
Drying & Storage:
Gently shake off remaining water drops.
Air-dry fully in a cool, dark location.
Store in a sealed container to protect from moisture.